If the above method fails, try using the offline activation method described in the following steps.Once you put your serial number in for each product and click Activate, the activation of each product will then automatically complete the next time it is launched without requiring additional activation steps via the LabVIEW Licensing Wizard. The products on this page should reflect the software installed on your machine that is not activated.Click Activate on this screen to open the LabVIEW Licensing Wizard.The following screen should appear when you open or launch an NI Product that is not yet activated.Select Enter activation codes from the drop-down menu, and enter the activation codes separated by commas.If you run into issues, please contact NI Support. Complete the form using the Computer ID of the offline machine, the serial number, and selecting the specific versions of the software you need to active. Generate the 20-digit activation codes by going to the NI Product Activation portal on a computer with an Internet connection.For older versions refer to the Legacy NILM Versions section. Remove the computer from the network or disable the WiFi to avoid getting the login screen. The steps below apply for NILM 4.7 or later. If the computer doesn't have an Internet connection but is connected to an active network, a window will show up requiring you to sign in to your NI User Account. If the activation failed, try again or use the offline activation method explained in the following sections.If the activation was successful, you should receive a message similar to the window below.Then, enter your serial number next to each software product that you want to activate and is included in your license. If the above method fails or you have not registered your serial number in your NI User Account, select Enter a serial number from the drop-down menu.If you registered the serial number in your NI User Account, select Check my account for licenses from the drop-down menu and click the Activate button.The steps below apply for NILM 4.7 or later. To activate the software online, you can use the identity-based method or enter the serial number. Make sure the computer is connected to the Internet and you have logged in to your NI User Account in the NI License Manager (NILM). Using activation codes (offline method).Identity-based activations using your NI User Account.There are three methods for activating single-seat licenses depending on whether or not the computer has Internet access.
0 kommentar(er)
